Latest News -

Home / Latest News (Page 4)

Some details to be noted during the use of the pipette
09-07-2019
In today's era of rapid biotechnology development, pipettes are a very common basic laboratory tool for people working on experiments! At the same time, because of the self-development of the pipette, its accuracy is get...
We should prepare for pre-lubrication before using the pipette
17-07-2019
If we can prepare for pre-lubrication before using the pipette, we can avoid the above problems to the utmost! So what is pre-lubrication? Pre-lubrication means that the pipette volume should be adjusted to the maximum c...
The pipette should be held upright when pipetting the liquid
23-07-2019
When adjusting the range, if you want to adjust from large volume to small volume, follow the normal adjustment method, turn the knob counterclockwise; but if you want to adjust from small volume to large volume, you can...
The common problems found during the maintenance of pipettes
06-08-2019
There are various problems with pipettes in most laboratories. The following are summarized in the common problems found during the maintenance of pipettes: 1. Pipette seal ring wear and aging, resulting in poor air tigh...
What should be included in good pipetting techniques
14-08-2019
Pipetting is the most common operation in the lab. However, whether it is an academic laboratory engaged in scientific research or a test laboratory, the generation of data is largely influenced by the performance of the...
The angle of the hand-held pipette affects accuracy
20-08-2019
Immersing the tip at the appropriate depth increases accuracy by 5%. If the tip is too immersed, it will cause a lot of liquid absorption. On the contrary, if the immersion is too shallow, it will take in air. The angle ...